JLK500/1+6+12+18+24+30 Rigid Stranding Machine With Ground shaft Type

Power Supply: 380V,3 Phrase, 50Hz
Application: Stranding
Payment: T/T or L/C
Delivery Time: 50-120 Days
Warranty Time: 12 Months
Parts Brand: Siemens, WNM, HRB,NSK,etc
Supply capacity: 10 Set/Month

Product Detail
Parameters
Components
Details

JLK500/1+6+12+18+24+30 Rigid Stranding Machine With Ground shaft Type.

1.Use:

it is mainly used for stranded section conductor compacting , round conductor stranding, drawing, pressing, etc., as well as stranding of small square ACSR.

2. Characteristics

Bobbin size : 400mm , 500mm , 630mm , 710mm , 800mm
Bobbin quantity of single cage : From 6 bobbin to 48 bobbin
Clamping : Pneumatic type clamping , Motor clamping , Manual Clamping
Tension control : Hysteresis tension control , Mechanical tension control
Mechanical tension control with feedback , Pneumatic tension control
Bobbin loading : Side bottom hydraulic loading , Side bottom electrical loading , Side loading

2.1	Strand Single wire diameter		Copper φ1.5－5.0m
2.1	Strand Single wire diameter		Aluminumφ1.8－5.0mm
2.2	Max strand O/D		45mm
2.3	Strand cage rotation speed	6 bobbins	241r/min
		12 bobbins	216r/min
		18 bobbins	193r/min
		24 bobbins	179r/min
		30bobbins	161.8r/min
2.4	Strand pitch	6 bobbins	44-850mm
		12 bobbins	52-937mm
		18 bobbins	61-1106mm
		24 bobbins	51-924mm
		30 bobbins	57-1028mm
2.5	Traction line speed		60m/min
2.6	Pay-off bobbin size in frame		PND 500
2.7	Traction wheel size		φ2000mm
2.8	Central pay-off size		PN500-PN630
2.9	Take-up bobbin size		PN1250-PN2000

3.1	φ630 centre Pay-off	1 set
3.2	6. 12.18 bobbins strand cage	Each 1 set
3.3	Assembling wire compacting unit	3 set
3.4	Meter counter	1 set
3.5	φ2000 double traction device	1 set
3.6	φ2500 take-up and traverse device	1 set
3.7	Electric control system	1 set
3.8	Transmission system	1 set
3.9	Safety protection fence	1 set
3.10	Anchor bolt	1 set

4.2.1	Adapt bobbin size	PND500
4.2.2	Adapt bobbin size	500x125x375mm
4.2.3	Rotation speed change	6 grade

4.2.4 Take-up tension mechanical friction control, manual adjustment.

4.2.5Electric turbine clamping structure, automatic locking, easy to operate, fast and safe. The turbine is supported by bearings, which is accurate in positioning and is not easy to wear, so as to avoid jamming.

4.2.6The gearbox is made of hard-toothed gears with positive and negative gears and neutral gear. Each gearbox is equipped with a lubricating oil pump to force lubrication..

4.2.7Equipped with the most advanced, single-disc, pulse-breaking parking protection device, the system can stop and brake in time when the coil is completed or disconnected..

4.2.8Pneumatic brakes to protect multiple points and brake quickly..

4.2.9Single-line pre-variable device at the front end of each cage.