1600/1+3 Cradle Type Cabling Machines For 50-400mmsq
Cabling Machine type Cradle (LAYING UP MACHINE ) 1600 ( 3+1 ) with taping machine .
For Cabling low power cables type SE, SER , URDT ( aluminium )
Single core or cable diameter min 10 to 50 mm
Diameter max of the assembled cable : 120mm
All communication holes between cages provided with ceramic horns to avoid scratching the veins
Voltage : 380V, Frequency : 50Hz.
Delivery time: 90-120 days.
Payment: 30% by T/T, 70% before delivery.
1600/1+3 Cradle Type Cabling Machines For 50-400mmsq.
the machine is mainly used for cabling 3 to 4 core wires,it manufactures both back-twist round cable and sector shaped cables without back-twist,also this type machine can be used for telephone cable,control cable,main cable,plastic cable and crosslinked cables,non metal wrapping and metal armoring could be done at the same time with stranding.
Single wire diameter
Strand cage rotation speed
Max lay-up diameter
Taping head rotation max speed
Steel wire Armouring head max speed
outlet line speed
Main motor power
Pay-off frame in cage
3150 portaltype back pay-off frame
3/1600 bobbin strand cage
Double die holder
tangent taping head
Steel belt armouring machine
Mechanical meter counter
pnuematic traction system
φ3150 portal take-up
Electronic control system
Safety protection device
Adapt bobbin size
4.2.4The main winch is of conical structure, which is
suitable for cable core releasing without bending, scratching or fan turning.
It is composed of gearbox, main shaft, support plate, pay off frame, electric
pre twisting device, untwisting device, filling device, brake device, tug and
4.2.5You can untwist round wires or sector wires without untwisting
The main winch wire rack adopts
electric pre twisting without stopping, which can adjust the pre twisting state
of the wire core in real time online under the running state.
4.2.6The tension of the reel in the pay
off frame is the mechanical friction tension of the large-diameter friction
disc. The tension is provided by the mutual friction between the brake disc and
the chain type damping belt. The tension is adjusted manually to meet the
tension range required in the pay off process
4.2.7 The pay off tray is made of
high-quality plates by assembly and welding, with reasonable design, high
overall structural strength and thick appearance
4.2.8 The hanging
plate is end shaft type, and the wireless handle controls the clamping and
loosening of the wire plate by remote control. The double top pins extend and retract at the same time to ensure that the wire plate is in the middle of the
pay off frame. The clamping device is equipped with mechanical over force
protection and electronic detection in place protection.
4.2.9The brake of
the main engine adopts large-diameter pneumatic butterfly brake disc with
multiple groups of brakes. The brake is efficient and stable. The brake disc is
separated from the support disc, which effectively solves the contradiction
between the brake and the tugboat lubrication.
and rear support plates of the main winch are respectively supported by tugs.
The tugs are placed in the bin shaped support seat and fixed by the underframe.
The tug seat can be manually adjusted by the screw rod through the processing
plane of the underframe. The tugboat is made of polymer material, which can
effectively control the running noise and eliminate the low-frequency vibration
during the running, so as to improve the overall running condition.
brake disc of the main engine is equipped with 12 groups of filling frames to
meet the filling requirements during the cabling process.
4.2.12The main winch is 6-stage variable speed, linked
with the main transmission ground shaft, with left-right and neutral functions.
The gear box of the main engine adopts hard tooth surface grinding gear, and
the lubricating oil pump is used for forced oil supply and spray lubrication.
reducer box is equipped with monitoring device, which can feed back signals to
PLC controller in real time, provide operation status, speed and other values,
and monitor the transmission system fault of the whole machine and give an
alarm in time.