II. Main Technical parameters

1.Inlet diameter: 2.6mm; Outlet diameter: 0.3mm-0.8mm

2.Max Speed: 1200mpm.

3.Maximum dies number: 21

4.Outer diameter of the dies: 30mm * 15mm thickness 20mm * 10mm thickness

5.Slip ratio of m/c: 16%+10%

6.Main motor: AC 37KW, with 37KW Inverter.

7.Spooler motor: AC 11KW, with 11KW Inverter

8.Loading of capacity: 480kg/max for DIN630mm Iron bobbin

9.Suitable diameter of bobbin: DIN 630mm

10.Brake: pneumatic brake

11.Capstan: Tungsten carbide

12.Capstan diameter: 254mm

13.Fix speed capstan diameter: 252mm

14.Machine Frame: Welded by steel plate

15.Power transmission: Timing belts

III. CPS -21DS Main drawing machine

1.Motor: AC 37KW

2.Gear transmission+Timing belt

3.Machine frame: Welded by steel pate

IV. Operation panel

1.PLC + Touching screen

2.With Operation buttons as back up

V. Electric system

1.Inverter control: 37KW+11KW

VI. CPS -180 Tension controller

Tension controller is composed of guide rollers,rocker,signal feedback device and sensor.The tensile balance is adjusted by air pressure (Note: Customer self shall provide air compressor)

1.Type: Pneumatic balance by swing arm, auto adjust

2.Adjusting for precision:1-10KG

3.Air pressure: 4-6KG/ CM2

4.Guide pulley: ALU.pulley with ceramic coated

5.Position detector: Precise electric resistance 1KΩ

6.Wire broken detector: Micro switch

VII. CPS -WS630 Single spooler

1.Wire range: 0.3mm-0.8mm

2.AC 11KW motor

3.Applicable bobbin size: DIN 630mm

VIII. CPS -TH250 Annealing machine

Vertical annealing machine by DC three-section,steam protecting.

Including electric conduction system, anti-oxidant protection , coolant system, electric system.

1.Annealing size 0.3mm-0.8mm

2.Annealing speed 1200mpm/Max.

3.Annealing voltage 70V

4.Annealing current 800A  

5.Annealing volume 56KVA  

6.Steam generator power 9 kw

7.Steam capacity:12kg/h

8.Power source (customize)  Three phase voltage: ～AC 3×__V (±10%)

Single phase voltage: ～AC __V (±10%)  Frequency: __Hz (±2%)

: ～AC 3×__V (±10%)

: ～AC __V (±10%)  : __Hz (±2%)

9.Compressed air Working pressure:0.6～0.7Mpa  Inflate value:±0.02Mpa Dew point:-25 ℃