2.1

 Pay-off frame

1 set

2.2

Center taping machine

1 set

2.3

Assembling wire frame

1 set

2.4

Single twisting machine

1 set

2.5

Electrical control cabinet

1 set

3.1.1

Reel size

Φ500-630mm(detailed size to be provided by your company)

3.1.2

Running max line speed

MAX80m/min

3.1.3

Top shaft form

Manual optical axis without center

3.1.5

Tension control

Magnetic powder clutch control

3.2.1

Form：.

Double head separation type center wrapping machine

3.2.2

Power ：

1.1KW motor

3.2.3

Wapping direction, can arbitrarily switch forward/reverse packages in the touch screen

3.2.4

Belt reel: (1) disc diameter: ψ 450mm, wrapping material disc 400mm

3.2.5

width：8mm-25mm

3.2.6

Applicable materials: aluminum foil, Mylar tape, non-woven fabric, cotton paper, etc

3.2.7

Wrapping distance: stepless adjustment of motor

3.2.8

Tension control: touch screen tracking adjustment (from full disk to empty disk, basic proof of material constant tension), which can be adjusted at will during operation

3.2.9

Belt speed: 2000pm / max, used in linkage with 1250 automatic setting single winch

3.2.1

Use

(1) Pvc.PE cable, power line, high-frequency digital cable, multiple integrated synchronous tapes

(2) SJT.SVTcable assembly strap;

3.2.3

Applicable single core wire diameter: ψ 0.7-4.0mm covered wire

3.2.4

After stranding, the maximum diameter is 25mm.

3.2.5

Stranding pitch range: 50-500mm (touch screen setting type);

3.2.6

Traverse line pitch range: 1.5-20mm (touch screen setting type)

3.2.7

coiling spool; ψ 1250mm * 950mm outer width: detailed size provided by the user (all made according to international standards)

3.2.9

Power

Main engine power: 18.5kw-6P

 Coiling power: 4kw-8p

Displacement power: 1hp1:10 reduction motor

3.2.10

Control: program design, automatic calculation of stranding distance and row distance, PLC and touch screen control are used to realize automatic tracking and routing control after stranding distance, row distance, belt pitch and belt tension are set

3.2.11

Power supply and power: total power of the whole machine is 30kW, voltage is 380V 50Hz, three-phase five wire

3.3.12

Floor area: the minimum use area of the whole set of equipment is 16 meters long * 4 meters wide

3.3.13

After the equipment leaves the factory, the Seller shall arrange personnel to the buyer's factory for installation and debugging, but the buyer shall be responsible for the installation of water and electricity pipelines. The Seller shall guarantee the equipment for one year from the date of delivery. Under normal use, the Seller shall be responsible for providing the parts required for maintenance (except for human and natural reasons). The maximum speed of the main engine is 320r / min. after the equipment is installed in the factory, the speed of the main engine reaches 320r / min/ The installation and commissioning are completed and the acceptance is qualified only when there is no vibration within min